|
Parameter
|
Description
|
|
View
(2D only)
|
Select the 2D view
|
|
Value to Use
|
Select either Diametral Pitch or Module, and then enter the relevant parameter
|
|
Diametral Pitch
|
Enter the diametral pitch
|
|
Module (mm)
|
Enter the module
|
|
Shaft Angle (deg.)
|
Enter the shaft angle in degrees
|
|
Face Width
|
Enter the face width
|
|
Configuration
|
Select to use the gear parameter values for only the gear, only the pinion, or for both the gear and the pinion; this can also be used to create miter gears
|
|
Gear Properties
|
Specify the parameters to draw the gear
|
|
No. of Teeth
|
Enter the number of teeth
|
|
Pitch Dia. (Ref.)
|
Displays the pitch diameter based on the diametral pitch and number of teeth
|
|
Mounting Distance
|
Enter the distance from the back of the gear to the pitch apex
|
|
Hub Diameter
|
Enter the hub diameter
|
|
Hub Projection
|
Enter the hub projection, for styles with a projected hub
|
|
Bore Diameter
|
Enter the bore diameter
|
|
Key Type
|
If the gear includes a keyway, select keyway shape (with ASME-recommended sizes), or select Custom size
|
|
Kwy Width/Height
|
For custom keyway sizes, enter the keyway width and height
|
|
Recess
|
If the gear has a recess, enter the recess value
|
|
Fillet Radius
|
Enter the fillet radius of the hub
|
|
Pinion Properties
|
For pinion only or gear and pinion configurations, specify the pinion parameters
|
|
No. of Teeth
|
Enter the number of teeth
|
|
Pitch Dia. (Ref.)
|
Displays the pitch diameter based on the diametral pitch and number of teeth
|
|
Mounting Distance
|
Enter the distance from the back of the pinion to the pitch apex
|
|
Hub Diameter
|
Enter the hub diameter
|
|
Hub Projection
|
Enter the hub projection, for styles with a projected hub
|
|
Bore Diameter
|
Enter the bore diameter
|
|
Key Type
|
If the pinion includes a keyway, select keyway shape (with ASME-recommended sizes), or select Custom size
|
|
Kwy Width/Height
|
For custom keyway sizes, enter the keyway width and height
|
|
Recess
|
If the pinion has a recess, enter the recess value
|
|
Fillet Radius
|
Enter the fillet radius of the hub
|
|
Show Pinion at Left
(2D only)
|
Displays the pinion on the left side of the bevel gear
|
|
Draw Center Lines
(2D only)
|
Draws the bevel gear with center lines
|
|
Show Teeth
(3D only)
|
Draws the bevel gear with teeth
|
|
Spiral Angle (Deg.)
(3D only)
|
Draws a 3D spiral bevel gear; specify the spiral angle degrees for the teeth
|
Bevel gears
